You are told to supply a DSCP value of 46 for an IP SLA Monitor stream of traffic. When you access the IP SLA Monitor configuration mode, you encounter only the following command to enter in the DSCP value:
R2(config-sla-monitor-jitter)#tos?
<0-255> Type of Service Value
What is the correct value you need to enter for this IP SLA Monitor stream of traffic to be assigned a DSCP value of 46?
Come back next week to learn the correct answer, or join an NMC Live On-line Group Mentoring session to discuss this topic and many other CCIE related topics.
The VLAN number is “8” because the configurable spanning root bridge priority value on a Cisco Catalyst switch that is closest to 8200 is 8192. When this configurable value of 8192 is subtracted from the supplied value of 8200 in the Question of the Week, the remainder is “8”. This calculation is performed due to the 802.1T structure of the Spanning Tree implementation supported on Cisco Catalyst switches. For more information, see the Cisco 360 Link-Layer Lesson Module or sign up for the NMC Live On-line Group Mentoring sessions that supplement Cisco 360 content.
You are told to assign a group of routers to a common VLAN; and you are not explicitly told what the VLAN number is. However, you are told that the unknown VLAN must possess a root bridge that is assigned bridge priority value of 8200. What is the unknown VLAN number?
Please come back to view the answer on Friday, May 21th.
Effective Monday, May 10th the Core Knowledge Questions section will be removed from the Routing and Switching and Voice CCIE labs. The 30 minutes that was previously allocated to the Core Knowledge Questions will now be allocated to the configuration section.
Consequently, the revised format of the Routing and Switching CCIE Lab will be only two sections
– a two hour long troubleshooting section and a six hour long configuration section.The same lab format is being used in the Assessment Labs and Exercise Workbook practice scenarios of Cisco 360 Learning Program making it easier for students to prepare for the exam under time pressure.
UPDATE
Official Cisco announcement:
https://learningnetwork.cisco.com/docs/DOC-6484